PNE NEW -- Tanner Platinum
4 Quarter Midget Shock
Quarter Midget Shock
|
Tanner
Generation
2 & 3 Shocks
| Maintenance Free design
- |
| Titanium
Nitride coated shafts for high wear
resistance |
|
BAND
SEAL on piston instead of "O" ring |
| For
shocks purchased after Jan 2009 --
use the Platinum 4 rebuild
kit.
(Look for the yellow seal on the bottom
of the shock) |
| Rates
from 2-7 |
| For
Split Valving (eg 3/6) the first number
is compression, the 2nd number rebound.
|
|
Tanner Shocks
(specify rates in comment
section at end of order form)
|
--Tanner
Shock Rebuild Tool Kit
--Valve stem kit
|
All
the tools you need to work
on the shocks |
| Replace
short valve stem on shock
with new longer valve stem |
|
Tanner Shock Tools
|
Tanner
Accessories
| "O"
Ring Kits for Gen 1, 2, 3 & 4 shocks |
|
Universal
Shock Wrench |
| Proprietary
blend of shock oil |
| Pressure
inlet extension for shock |
| Stainless
shafts - GEN 1 short & long |
| Stainless
shafts - GEN 2, Platinum 4 |
| Universal
Shock Clamp Tool - available
|
|
Tanner Shock
Rebuild Kits
|
Smoker
Shocks
|
#3 and #5
damping, 2" or 3" travel |
|
Hvy
Dty Bottom Seal unit eliminates leaks |
| Threaded
sleeves, rings and cones available separately |
|
Order ends
separately. |
|
Upgrade
Kits -- includes shaft, piston &
seal |
|
Smoker Shock Parts
|
NEW
-- 5500 Series ARS Shocks
Now
available with external pressure
| The 5500 Series Quarter Midget Shock
provides both high speed and low speed control |
| The pre-loaded shim stack on the main
piston provides for high speed dampening unequaled in any
quarter midget shock on the market.
The rougher the track, the higher the performance |
| Weekly maintenance is eliminated by
shaft seals that don't leak |
| Clamp style adjusting ring and slotted
cone |
|
ARS
Shafts, bushings and seals
|
Long
or short shafts available |
NEW
- Spring Assist Kit
Bottom Shock Ends available
Machined from billet aluminum
|
ARS Shock Recommendation Table
(Unlike other shocks, the first number is the
rebound, the second is the compression)
NOTE: The Coil Kit must be ordered
separately. It does not come with the shock.
|
Boomerang 2% Springs
|
Lighweight
Springs |
|
Springs
are individually rated |
|
Within
2% of the rated value |
| 75#
to 155# (see table below) |
|
Powder
Coated Black |
|
Eibach
Springs
| Proprietary
German Steel |
| 75#
- 155# in 5 # increments |
| Individually
rated |
|
Boomerang 2% Springs
|
Eibach Springs
|
Tanner Springs - Standard 5"
|